В трансивере реализован CAT протокол по версии KENWOOD TS-590S С описанием протокола можно ознакомиться здесь ts_590_g_pc_command_e.pdf
В таблице показаны текущие команды протокола , реализованные программным обеспечением трансивера
| # | FW version | Command | Description |
|---|---|---|---|
| 1 | 1.6.0 | AI | Sets or reads the Auto Information (AI) function ON/ OFF |
| 2 | 1.6.0 | FA / FB | Sets or reads the VFO A/ VFO B frequency. |
| 3 | 1.6.0 | FR / FT | Selects or reads the VFO or Memory channel |
| 4 | 1.6.0 | ID | Reads the transceiver ID number |
| 5 | 1.6.0 | IF | Reads the transceiver status |
| 6 | 1.6.0 | KS | Sets and reads the Keying speed |
| 7 | 1.6.0 | KY | Converts the entered characters into morse code while keying |
| 8 | 1.6.0 | MD | Sets and reads the operating mode status |
| 9 | 1.6.0 | NB | Sets and reads the Noise Blanker function status |
| 10 | 1.6.0 | NR | Sets and reads the Noise Reduction function status |
| 11 | 1.6.0 | NT | Sets and reads the Notch Filter status. |
| 12 | 1.6.0 | PC | Sets and reads the output power |
| 13 | 1.6.0 | RX | Sets the receiver function status. |
| 14 | 1.6.0 | TX | Sets the transmission mode. |
| 15 | 1.6.0 | RI | Reads the RX frequency and Mode |
*По мере необходимости - реализованные команды будут дополняться
*Этот протокол поддерживает работу только одного приемника. Поэтому, при управлении по данному протоколу трансивер должен быть включен в режиме RX1