Wiki source code of Установка и настройка в Linux
Last modified by UT2UK on 2026/11/16 13:09
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | {{velocity}} | ||
| 2 | $xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle") | ||
| 3 | {{/velocity}} | ||
| 4 | |||
| 5 | (% class="eax" %) | ||
| 6 | ((( | ||
| 7 | (% class="eax-back" %) | ||
| 8 | [[← EAX control user guide>>Main.ERMAK-TT.Руководство пользователя EAX control.WebHome]] | ||
| 9 | |||
| 10 | (% class="eax-pagehead" %) | ||
| 11 | ((( | ||
| 12 | (% class="eax-pagehead-title" %) | ||
| 13 | Installing EAX on Linux | ||
| 14 | |||
| 15 | (% class="eax-pagehead-text" %) | ||
| 16 | How to install EAX, create the virtual sound cards and make your first FT8 QSO. Fedora 38–44 and Ubuntu 20.04–24.04, about 15 minutes. | ||
| 17 | ))) | ||
| 18 | |||
| 19 | === What you need === | ||
| 20 | |||
| 21 | * The ERMAK-TT transceiver is connected to the router and the EAX interface is enabled. You know its IP address. | ||
| 22 | * A Linux computer on the same network. | ||
| 23 | * The administrator password for **sudo** commands. | ||
| 24 | * For digital modes — JTDX or WSJT-X installed. | ||
| 25 | |||
| 26 | (% class="eax-toc" %) | ||
| 27 | ((( | ||
| 28 | Steps | ||
| 29 | |||
| 30 | {{toc depth="2"/}} | ||
| 31 | ))) | ||
| 32 | |||
| 33 | (% class="eax-howto" %) | ||
| 34 | ((( | ||
| 35 | == Install EAX == | ||
| 36 | |||
| 37 | Download the package for your system: | ||
| 38 | |||
| 39 | (% class="eax-download" %) | ||
| 40 | ((( | ||
| 41 | [[⬇ Ubuntu 24.04>>attach:Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome@eaxcontrol-1.5.2-ubuntu24.04.deb||class="btn btn-success"]] [[⬇ Fedora 42>>attach:Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome@eaxcontrol-1.5.2-fc42.rpm||class="btn btn-success"]] [[Other versions>>Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome||class="btn btn-default"]] | ||
| 42 | ))) | ||
| 43 | |||
| 44 | Open a terminal in the folder with the downloaded file and install the package: | ||
| 45 | |||
| 46 | (% class="eax-split" %) | ||
| 47 | ((( | ||
| 48 | (% class="eax-card" %) | ||
| 49 | ((( | ||
| 50 | Ubuntu | ||
| 51 | |||
| 52 | {{code language="bash"}} | ||
| 53 | sudo apt install ./eaxcontrol-1.5.2-ubuntu24.04.deb | ||
| 54 | {{/code}} | ||
| 55 | ))) | ||
| 56 | |||
| 57 | (% class="eax-card" %) | ||
| 58 | ((( | ||
| 59 | Fedora | ||
| 60 | |||
| 61 | {{code language="bash"}} | ||
| 62 | sudo dnf install ./eaxcontrol-1.5.2-fc42.rpm | ||
| 63 | {{/code}} | ||
| 64 | ))) | ||
| 65 | ))) | ||
| 66 | |||
| 67 | (% class="eax-check" %) | ||
| 68 | ((( | ||
| 69 | Check: **EAX Control** appears in the application menu. | ||
| 70 | ))) | ||
| 71 | |||
| 72 | == Create the virtual sound cards == | ||
| 73 | |||
| 74 | A virtual sound card is a “cable” inside the computer: EAX sends audio into it, and JTDX or WSJT-X receive it. On Linux the **snd-aloop** module creates such cards. You need two cards: no. 10 for receive and no. 11 for transmit. | ||
| 75 | |||
| 76 | Paste these three commands into the terminal. They configure the cards and enable them at once, no reboot needed: | ||
| 77 | |||
| 78 | {{code language="bash"}} | ||
| 79 | echo "options snd-aloop enable=1,1 index=10,11 pcm_substreams=2,2" | sudo tee /etc/modprobe.d/snd-aloop.conf | ||
| 80 | echo "snd-aloop" | sudo tee /etc/modules-load.d/snd-aloop.conf | ||
| 81 | sudo modprobe snd-aloop | ||
| 82 | {{/code}} | ||
| 83 | |||
| 84 | (% class="eax-check" %) | ||
| 85 | ((( | ||
| 86 | Check: **aplay -l | grep Loopback** shows 4 lines — cards 10 and 11, two devices each. | ||
| 87 | ))) | ||
| 88 | |||
| 89 | {{expand title="modprobe reports an error (Ubuntu)" expanded="false"}} | ||
| 90 | On some Ubuntu versions the module is in a separate package. Install it and repeat the commands: | ||
| 91 | |||
| 92 | {{code language="bash"}} | ||
| 93 | sudo apt install linux-modules-extra-$(uname -r) | ||
| 94 | {{/code}} | ||
| 95 | |||
| 96 | On Fedora the module is already in the system. | ||
| 97 | {{/expand}} | ||
| 98 | |||
| 99 | == Add names for digital mode programs == | ||
| 100 | |||
| 101 | This command creates two devices with clear names — **ERMAK_OUT** and **ERMAK_IN**. You will select them in JTDX or WSJT-X. | ||
| 102 | |||
| 103 | {{code language="bash"}} | ||
| 104 | cat >> ~/.asoundrc <<'EOF' | ||
| 105 | pcm.ERMAK_OUT { | ||
| 106 | type plug | ||
| 107 | slave { pcm "hw:10,0,0" format S16_LE rate 48000 channels 2 } | ||
| 108 | hint { show on description "Ermak EAX VAC RX" } | ||
| 109 | } | ||
| 110 | pcm.ERMAK_IN { | ||
| 111 | type plug | ||
| 112 | slave { pcm "hw:11,1,0" format S16_LE rate 48000 channels 1 } | ||
| 113 | hint { show on description "Ermak EAX VAC TX" } | ||
| 114 | } | ||
| 115 | EOF | ||
| 116 | {{/code}} | ||
| 117 | |||
| 118 | (% class="eax-note" %) | ||
| 119 | ((( | ||
| 120 | Do not add **pcm.!default** lines from old guides to **~~/.asoundrc**. Today PipeWire or PulseAudio manages audio on Linux, and such lines can mute audio in other programs. | ||
| 121 | ))) | ||
| 122 | |||
| 123 | == Set up EAX == | ||
| 124 | |||
| 125 | Start EAX and click the settings button [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]]. Select the devices as shown: | ||
| 126 | |||
| 127 | (% class="eax-figure" %) | ||
| 128 | ((( | ||
| 129 | [[image:devmap_linux_en.png]] | ||
| 130 | ))) | ||
| 131 | |||
| 132 | (% class="eax-split" %) | ||
| 133 | ((( | ||
| 134 | (% class="eax-shot" %) | ||
| 135 | ((( | ||
| 136 | [[image:05_settings_linux.png]] | ||
| 137 | ))) | ||
| 138 | |||
| 139 | ((( | ||
| 140 | * **EAX Output** — **Loopback: PCM (hw:10,1)** | ||
| 141 | * **EAX Input** — **Loopback: PCM (hw:11,0)** | ||
| 142 | * **Audio device** — **default**: audio goes to the speakers selected in the system | ||
| 143 | * **Local IP address** — the computer address on the same network as the transceiver | ||
| 144 | |||
| 145 | (% class="eax-key" %) | ||
| 146 | ((( | ||
| 147 | **Local IP address is the most important field.** The first three numbers must match the transceiver address: 192.168.1.50 → 192.168.1.10. On first start it shows 127.0.0.1 — with it there is no audio. | ||
| 148 | ))) | ||
| 149 | |||
| 150 | Click **OK**. | ||
| 151 | ))) | ||
| 152 | ))) | ||
| 153 | |||
| 154 | (% class="eax-note" %) | ||
| 155 | ((( | ||
| 156 | EAX reads the list of audio devices at startup. If the Loopback cards are not in the list, close EAX and start it again. | ||
| 157 | ))) | ||
| 158 | |||
| 159 | == Connect to the transceiver == | ||
| 160 | |||
| 161 | 1. In the URL field type the transceiver address and port 4002, for example **192.168.1.50:4002**. | ||
| 162 | 1. Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_connect.png]]. | ||
| 163 | |||
| 164 | (% class="eax-check" %) | ||
| 165 | ((( | ||
| 166 | Check: **Speed** in the status line is above zero, the L and R meters move. | ||
| 167 | ))) | ||
| 168 | |||
| 169 | {{expand title="Speed is zero — open the port in the firewall" expanded="false"}} | ||
| 170 | Fedora: | ||
| 171 | |||
| 172 | {{code language="bash"}} | ||
| 173 | sudo firewall-cmd --permanent --add-port=16742/udp | ||
| 174 | sudo firewall-cmd --reload | ||
| 175 | {{/code}} | ||
| 176 | |||
| 177 | Ubuntu (if ufw is enabled): | ||
| 178 | |||
| 179 | {{code language="bash"}} | ||
| 180 | sudo ufw allow 16742/udp | ||
| 181 | {{/code}} | ||
| 182 | |||
| 183 | Other causes — see [[Connected, but no audio>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome||anchor="nosound"]]. | ||
| 184 | {{/expand}} | ||
| 185 | |||
| 186 | == Set up JTDX or WSJT-X == | ||
| 187 | |||
| 188 | In the program select **Input — ERMAK_OUT** and **Output — ERMAK_IN**, and on the Radio tab — **Hamlib NET rigctl** with the transceiver address and port 4532. This is how correct JTDX and EAX settings look together: | ||
| 189 | |||
| 190 | (% class="eax-figure" %) | ||
| 191 | ((( | ||
| 192 | [[image:eax_jtdx_linux.png]] | ||
| 193 | ))) | ||
| 194 | |||
| 195 | Details: [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]]. | ||
| 196 | |||
| 197 | (% class="eax-check" %) | ||
| 198 | ((( | ||
| 199 | Check: JTDX shows decodes. You are ready for QSOs. | ||
| 200 | ))) | ||
| 201 | ))) | ||
| 202 | |||
| 203 | == Summary of settings == | ||
| 204 | |||
| 205 | |=Program|=Field|=Value | ||
| 206 | |EAX|URL|transceiver IP address:4002 | ||
| 207 | |EAX|EAX Output|Loopback: PCM (hw:10,1) | ||
| 208 | |EAX|EAX Input|Loopback: PCM (hw:11,0) | ||
| 209 | |EAX|Audio device|default | ||
| 210 | |EAX|Local IP address|computer IP address on the transceiver network | ||
| 211 | |JTDX / WSJT-X|Input|ERMAK_OUT | ||
| 212 | |JTDX / WSJT-X|Output|ERMAK_IN | ||
| 213 | |JTDX / WSJT-X|Rig|Hamlib NET rigctl, transceiver IP address:4532 | ||
| 214 | |||
| 215 | == Related articles == | ||
| 216 | |||
| 217 | * [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]] | ||
| 218 | * [[Program windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Окна программы.WebHome]] | ||
| 219 | * [[Troubleshooting>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]] | ||
| 220 | * [[All EAX versions>>Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome]] | ||
| 221 | ))) |