Last modified by UT2UK on 2026/11/16 13:12

Show last authors
1 {{velocity}}
2 $xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle")
3 {{/velocity}}
4
5 (% class="eax" %)
6 (((
7 (% class="eax-back" %)
8 [[← EAX control user guide>>Main.ERMAK-TT.Руководство пользователя EAX control.WebHome]]
9
10 (% class="eax-pagehead" %)
11 (((
12 (% class="eax-pagehead-title" %)
13 Installing EAX on Windows
14
15 (% class="eax-pagehead-text" %)
16 How to install EAX and the virtual sound cards, connect to the transceiver and make your first FT8 QSO. Windows 10 and 11 (64-bit), about 15 minutes.
17 )))
18
19 === What you need ===
20
21 * The ERMAK-TT transceiver is connected to the router and the EAX interface is enabled. You know its IP address.
22 * A Windows computer on the same network and administrator rights to install the driver.
23 * For digital modes — JTDX or WSJT-X installed.
24
25 (% class="eax-toc" %)
26 (((
27 On this page
28
29 {{toc depth="2"/}}
30 )))
31
32 (% class="eax-howto" %)
33 (((
34 == Install the virtual sound cards ==
35
36 A virtual sound card is a “cable” inside the computer: EAX sends audio into it, and JTDX or WSJT-X receive it. You need **two** cards: one for receive, one for transmit. Choose a driver:
37
38 (% class="eax-split" %)
39 (((
40 (% class="eax-card" %)
41 (((
42 ERMAK VAC
43
44 Our driver, free. Low latency. Driver signature enforcement must be disabled before installation.
45
46 [[Download ERMAK VAC>>https://nx8619.your-storageshare.de/s/pdeEJr5mG4ix7PQ?dir=/EAX%20VAC||class="btn btn-default"]]
47 )))
48
49 (% class="eax-card" %)
50 (((
51 Virtual Audio Cable
52
53 Driver by Eugene Muzychenko. Signed, installs like a normal program. The free Lite version gives only one cable — enough for receive only.
54
55 [[Download Virtual Audio Cable>>https://vac.muzychenko.net/en/download.htm||class="btn btn-default"]]
56 )))
57 )))
58
59 {{expand title="How to install ERMAK VAC" expanded="false"}}
60 1. Disable driver signature enforcement: [[Microsoft guide>>https://answers.microsoft.com/en-us/windows/forum/all/permanent-disable-driver-signature-verification/009c3498-bef8-4564-bb52-1d05812506e0]]. If Secure Boot is enabled in BIOS, disable it.
61 1. Unpack the **EAX_VAX_X64_xxx.zip** archive.
62 1. Open **Device Manager** → **Action** → **Add legacy hardware**.
63 1. Point to the driver folder and finish the installation.
64 1. Repeat steps 3–4 once more so that there are two cards.
65
66 [[image:Main.ERMAK.Руководство пользователя ЕРМАК.EAX - утилита обмена аудиопотоками с PC.Установка и настройка EAX в среде WINDOWS.WebHome@legasy.png||width="560"]]
67 {{/expand}}
68
69 {{expand title="How to install Virtual Audio Cable" expanded="false"}}
70 1. Download the Trial or full version — Lite has only one cable.
71 1. Unpack the archive and run **setup64.exe**.
72 1. Open the **Control Panel** that comes with Virtual Audio Cable.
73 1. Set the number of cables to **2** and click **Set**.
74
75 The devices **Line 1** and **Line 2** appear in the system. Use them on this page instead of the ERMAK VAC names:
76
77 |=Where|=ERMAK VAC|=Virtual Audio Cable
78 |EAX → EAX Output|Line Volume (EAX VAC)|Line 1
79 |EAX → EAX Input|Line In (2- EAX VAC)|Line 2
80 |JTDX → Input|Line In (EAX VAC)|Line 1
81 |JTDX → Output|Line Volume (2- EAX VAC)|Line 2
82 {{/expand}}
83
84 **Audio format.** Open **Control Panel → Sound**. On the Playback and Recording tabs, for each virtual card open **Properties → Advanced** and select **2 channel, 16 bit, 48000 Hz**.
85
86 (% class="eax-check" %)
87 (((
88 Check: **Control Panel → Sound** shows two virtual cards on the Playback tab and two on the Recording tab.
89 )))
90
91 == Install EAX ==
92
93 [[⬇ Download EAX 1.5.2 for Windows>>attach:Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome@eaxcontrol-1.5.2-windows-x64-setup.exe||class="btn btn-primary"]]
94
95 1. Run the downloaded file.
96 1. If an old EAX version is installed, agree to remove it.
97 1. Tick **Create a desktop shortcut** if you want a shortcut, and **Run at Windows startup** if EAX should start with Windows.
98 1. Click **Install**, then **Finish**.
99
100 (% class="eax-check" %)
101 (((
102 Check: **EAX Control Panel** is in the Start menu.
103 )))
104
105 {{expand title="The EAX window is white" expanded="false"}}
106 Install the [[OpenCL, OpenGL and Vulkan Compatibility Pack>>https://apps.microsoft.com/detail/9nqpsl29bfff]] from the Microsoft Store and start EAX again.
107 {{/expand}}
108
109 == Set up EAX ==
110
111 Start EAX and click the settings button [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]]. Select the devices as shown:
112
113 (% class="eax-figure" %)
114 (((
115 [[image:devmap_windows_en.png]]
116 )))
117
118 * **EAX Output** — **Line Volume (EAX VAC)**
119 * **EAX Input** — **Line In (2- EAX VAC)**
120 * **Audio device** — your speakers or headphones, for example **Speakers (Realtek(R) Audio)**
121
122 (% class="eax-key" %)
123 (((
124 **Local IP address is the most important field on Windows.** A computer often has several addresses: Ethernet, Wi-Fi, VPN, VirtualBox. Select the one whose first three numbers match the transceiver address: 192.168.1.50 → 192.168.1.10. With another one EAX connects, but there is no audio. [[Why>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome||anchor="nosound"]]
125 )))
126
127 Click **OK**. This is how correct EAX (right) and JTDX (left) settings look:
128
129 (% class="eax-shot" %)
130 (((
131 [[image:Main.ERMAK.Руководство пользователя ЕРМАК.EAX - утилита обмена аудиопотоками с PC.Установка и настройка EAX в среде WINDOWS.WebHome@legasy4.png]]
132 )))
133
134 == Connect to the transceiver ==
135
136 1. In the URL field type the transceiver address and port 4002, for example **192.168.1.50:4002**.
137 1. Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_connect.png]].
138 1. Windows asks about network access — click **Allow access** and tick **Private networks**.
139
140 (% class="eax-check" %)
141 (((
142 Check: **Speed** in the status line is above zero, the L and R meters move.
143 )))
144
145 == Set up JTDX or WSJT-X ==
146
147 In the program select **Input — Line In (EAX VAC)** and **Output — Line Volume (2- EAX VAC)**. Details: [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]].
148
149 (% class="eax-check" %)
150 (((
151 Check: JTDX shows decodes. You are ready for QSOs.
152 )))
153 )))
154
155 == Working from the tray ==
156
157 On Windows EAX lives in the notification area, next to the clock. You can hide the window — the audio keeps flowing.
158
159 (% class="eax-figure" %)
160 (((
161 [[image:tray_en.png]]
162 )))
163
164 **Icon menu** (right click): **Connect to RIG** — connect or disconnect, **Speaker** — audio to speakers, **Mixer..** — receiver selection, **Settings** — settings, **Quit** — exit.
165
166 **The ✕ button and exit:**
167
168 |=What you do|=What happens
169 |Click ✕, EAX is connected|The window hides to the tray, EAX keeps working
170 |Click ✕, EAX is connecting|Nothing — wait for the connection
171 |Click ✕ or Quit, EAX is not connected|EAX asks “Do you want to quit?”
172 |Select Quit, EAX is connected|EAX asks you to disconnect first (Connect to RIG)
173
174 (% class="eax-note" %)
175 (((
176 No icon? Click the **˄** arrow next to the clock. To keep the icon always visible, drag it to the taskbar.
177 )))
178
179 == Summary of settings ==
180
181 |=Program|=Field|=ERMAK VAC|=Virtual Audio Cable
182 |EAX|URL|transceiver IP address:4002|transceiver IP address:4002
183 |EAX|EAX Output|Line Volume (EAX VAC)|Line 1
184 |EAX|EAX Input|Line In (2- EAX VAC)|Line 2
185 |EAX|Local IP address|computer IP address on the transceiver network|computer IP address on the transceiver network
186 |JTDX / WSJT-X|Input|Line In (EAX VAC)|Line 1
187 |JTDX / WSJT-X|Output|Line Volume (2- EAX VAC)|Line 2
188 |JTDX / WSJT-X|Rig|Hamlib NET rigctl, IP:4532|Hamlib NET rigctl, IP:4532
189
190 == Related articles ==
191
192 * [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]]
193 * [[Program windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Окна программы.WebHome]]
194 * [[Troubleshooting>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]]
195 * [[All EAX versions>>Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome]]
196 )))