Wiki source code of Установка и настройка в Windows
Last modified by UT2UK on 2026/11/16 13:12
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
| |
6.4 | 1 | {{velocity}} |
| |
6.11 | 2 | $xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle") |
| |
6.4 | 3 | {{/velocity}} |
| |
6.2 | 4 | |
| 5 | (% class="eax" %) | ||
| |
1.1 | 6 | ((( |
| |
6.2 | 7 | (% class="eax-back" %) |
| |
18.2 | 8 | [[← EAX control user guide>>Main.ERMAK-TT.Руководство пользователя EAX control.WebHome]] |
| |
1.1 | 9 | |
| |
6.2 | 10 | (% class="eax-pagehead" %) |
| 11 | ((( | ||
| 12 | (% class="eax-pagehead-title" %) | ||
| |
18.2 | 13 | Installing EAX on Windows |
| |
1.1 | 14 | |
| |
6.2 | 15 | (% class="eax-pagehead-text" %) |
| |
18.2 | 16 | How to install EAX and the virtual sound cards, connect to the transceiver and make your first FT8 QSO. Windows 10 and 11 (64-bit), about 15 minutes. |
| |
1.1 | 17 | ))) |
| 18 | |||
| |
18.2 | 19 | === What you need === |
| |
6.3 | 20 | |
| |
18.2 | 21 | * The ERMAK-TT transceiver is connected to the router and the EAX interface is enabled. You know its IP address. |
| 22 | * A Windows computer on the same network and administrator rights to install the driver. | ||
| 23 | * For digital modes — JTDX or WSJT-X installed. | ||
| |
6.3 | 24 | |
| |
6.2 | 25 | (% class="eax-toc" %) |
| 26 | ((( | ||
| |
18.2 | 27 | On this page |
| |
1.1 | 28 | |
| |
6.2 | 29 | {{toc depth="2"/}} |
| 30 | ))) | ||
| |
1.1 | 31 | |
| |
6.2 | 32 | (% class="eax-howto" %) |
| 33 | ((( | ||
| |
18.2 | 34 | == Install the virtual sound cards == |
| |
1.1 | 35 | |
| |
18.2 | 36 | A virtual sound card is a “cable” inside the computer: EAX sends audio into it, and JTDX or WSJT-X receive it. You need **two** cards: one for receive, one for transmit. Choose a driver: |
| |
1.1 | 37 | |
| |
6.2 | 38 | (% class="eax-split" %) |
| 39 | ((( | ||
| 40 | (% class="eax-card" %) | ||
| 41 | ((( | ||
| 42 | ERMAK VAC | ||
| |
1.1 | 43 | |
| |
18.2 | 44 | Our driver, free. Low latency. Driver signature enforcement must be disabled before installation. |
| |
1.1 | 45 | |
| |
18.2 | 46 | [[Download ERMAK VAC>>https://nx8619.your-storageshare.de/s/pdeEJr5mG4ix7PQ?dir=/EAX%20VAC||class="btn btn-default"]] |
| |
6.2 | 47 | ))) |
| |
1.1 | 48 | |
| |
6.2 | 49 | (% class="eax-card" %) |
| 50 | ((( | ||
| 51 | Virtual Audio Cable | ||
| |
4.2 | 52 | |
| |
18.2 | 53 | Driver by Eugene Muzychenko. Signed, installs like a normal program. The free Lite version gives only one cable — enough for receive only. |
| |
1.1 | 54 | |
| |
18.2 | 55 | [[Download Virtual Audio Cable>>https://vac.muzychenko.net/en/download.htm||class="btn btn-default"]] |
| |
1.1 | 56 | ))) |
| |
6.2 | 57 | ))) |
| |
1.1 | 58 | |
| |
18.2 | 59 | {{expand title="How to install ERMAK VAC" expanded="false"}} |
| 60 | 1. Disable driver signature enforcement: [[Microsoft guide>>https://answers.microsoft.com/en-us/windows/forum/all/permanent-disable-driver-signature-verification/009c3498-bef8-4564-bb52-1d05812506e0]]. If Secure Boot is enabled in BIOS, disable it. | ||
| 61 | 1. Unpack the **EAX_VAX_X64_xxx.zip** archive. | ||
| 62 | 1. Open **Device Manager** → **Action** → **Add legacy hardware**. | ||
| 63 | 1. Point to the driver folder and finish the installation. | ||
| 64 | 1. Repeat steps 3–4 once more so that there are two cards. | ||
| |
1.1 | 65 | |
| |
6.2 | 66 | [[image:Main.ERMAK.Руководство пользователя ЕРМАК.EAX - утилита обмена аудиопотоками с PC.Установка и настройка EAX в среде WINDOWS.WebHome@legasy.png||width="560"]] |
| 67 | {{/expand}} | ||
| |
1.1 | 68 | |
| |
18.2 | 69 | {{expand title="How to install Virtual Audio Cable" expanded="false"}} |
| 70 | 1. Download the Trial or full version — Lite has only one cable. | ||
| 71 | 1. Unpack the archive and run **setup64.exe**. | ||
| 72 | 1. Open the **Control Panel** that comes with Virtual Audio Cable. | ||
| 73 | 1. Set the number of cables to **2** and click **Set**. | ||
| |
4.2 | 74 | |
| |
18.2 | 75 | The devices **Line 1** and **Line 2** appear in the system. Use them on this page instead of the ERMAK VAC names: |
| |
4.2 | 76 | |
| |
18.2 | 77 | |=Where|=ERMAK VAC|=Virtual Audio Cable |
| |
6.2 | 78 | |EAX → EAX Output|Line Volume (EAX VAC)|Line 1 |
| 79 | |EAX → EAX Input|Line In (2- EAX VAC)|Line 2 | ||
| 80 | |JTDX → Input|Line In (EAX VAC)|Line 1 | ||
| 81 | |JTDX → Output|Line Volume (2- EAX VAC)|Line 2 | ||
| 82 | {{/expand}} | ||
| |
4.2 | 83 | |
| |
18.2 | 84 | **Audio format.** Open **Control Panel → Sound**. On the Playback and Recording tabs, for each virtual card open **Properties → Advanced** and select **2 channel, 16 bit, 48000 Hz**. |
| |
1.1 | 85 | |
| |
6.2 | 86 | (% class="eax-check" %) |
| 87 | ((( | ||
| |
18.2 | 88 | Check: **Control Panel → Sound** shows two virtual cards on the Playback tab and two on the Recording tab. |
| |
6.2 | 89 | ))) |
| |
1.1 | 90 | |
| |
18.2 | 91 | == Install EAX == |
| |
1.1 | 92 | |
| |
18.2 | 93 | [[⬇ Download EAX 1.5.2 for Windows>>attach:Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome@eaxcontrol-1.5.2-windows-x64-setup.exe||class="btn btn-primary"]] |
| |
1.1 | 94 | |
| |
18.2 | 95 | 1. Run the downloaded file. |
| 96 | 1. If an old EAX version is installed, agree to remove it. | ||
| 97 | 1. Tick **Create a desktop shortcut** if you want a shortcut, and **Run at Windows startup** if EAX should start with Windows. | ||
| 98 | 1. Click **Install**, then **Finish**. | ||
| |
1.1 | 99 | |
| |
6.2 | 100 | (% class="eax-check" %) |
| 101 | ((( | ||
| |
18.2 | 102 | Check: **EAX Control Panel** is in the Start menu. |
| |
6.2 | 103 | ))) |
| |
1.1 | 104 | |
| |
18.2 | 105 | {{expand title="The EAX window is white" expanded="false"}} |
| 106 | Install the [[OpenCL, OpenGL and Vulkan Compatibility Pack>>https://apps.microsoft.com/detail/9nqpsl29bfff]] from the Microsoft Store and start EAX again. | ||
| |
6.2 | 107 | {{/expand}} |
| |
1.1 | 108 | |
| |
18.2 | 109 | == Set up EAX == |
| |
1.1 | 110 | |
| |
18.2 | 111 | Start EAX and click the settings button [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]]. Select the devices as shown: |
| |
1.1 | 112 | |
| |
6.2 | 113 | (% class="eax-figure" %) |
| 114 | ((( | ||
| |
18.2 | 115 | [[image:devmap_windows_en.png]] |
| |
6.2 | 116 | ))) |
| |
1.1 | 117 | |
| |
6.2 | 118 | * **EAX Output** — **Line Volume (EAX VAC)** |
| 119 | * **EAX Input** — **Line In (2- EAX VAC)** | ||
| |
18.2 | 120 | * **Audio device** — your speakers or headphones, for example **Speakers (Realtek(R) Audio)** |
| |
1.1 | 121 | |
| |
6.2 | 122 | (% class="eax-key" %) |
| 123 | ((( | ||
| |
18.2 | 124 | **Local IP address is the most important field on Windows.** A computer often has several addresses: Ethernet, Wi-Fi, VPN, VirtualBox. Select the one whose first three numbers match the transceiver address: 192.168.1.50 → 192.168.1.10. With another one EAX connects, but there is no audio. [[Why>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome||anchor="nosound"]] |
| |
6.2 | 125 | ))) |
| |
1.1 | 126 | |
| |
18.2 | 127 | Click **OK**. This is how correct EAX (right) and JTDX (left) settings look: |
| |
1.1 | 128 | |
| |
6.2 | 129 | (% class="eax-shot" %) |
| 130 | ((( | ||
| 131 | [[image:Main.ERMAK.Руководство пользователя ЕРМАК.EAX - утилита обмена аудиопотоками с PC.Установка и настройка EAX в среде WINDOWS.WebHome@legasy4.png]] | ||
| 132 | ))) | ||
| |
1.1 | 133 | |
| |
18.2 | 134 | == Connect to the transceiver == |
| |
1.1 | 135 | |
| |
18.2 | 136 | 1. In the URL field type the transceiver address and port 4002, for example **192.168.1.50:4002**. |
| 137 | 1. Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_connect.png]]. | ||
| 138 | 1. Windows asks about network access — click **Allow access** and tick **Private networks**. | ||
| |
1.1 | 139 | |
| |
6.2 | 140 | (% class="eax-check" %) |
| 141 | ((( | ||
| |
18.2 | 142 | Check: **Speed** in the status line is above zero, the L and R meters move. |
| |
6.2 | 143 | ))) |
| |
2.2 | 144 | |
| |
18.2 | 145 | == Set up JTDX or WSJT-X == |
| |
2.2 | 146 | |
| |
18.2 | 147 | In the program select **Input — Line In (EAX VAC)** and **Output — Line Volume (2- EAX VAC)**. Details: [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]]. |
| |
2.2 | 148 | |
| |
6.2 | 149 | (% class="eax-check" %) |
| |
1.1 | 150 | ((( |
| |
18.2 | 151 | Check: JTDX shows decodes. You are ready for QSOs. |
| |
2.2 | 152 | ))) |
| |
6.2 | 153 | ))) |
| |
1.1 | 154 | |
| |
18.2 | 155 | == Working from the tray == |
| |
1.1 | 156 | |
| |
18.2 | 157 | On Windows EAX lives in the notification area, next to the clock. You can hide the window — the audio keeps flowing. |
| |
1.1 | 158 | |
| |
6.2 | 159 | (% class="eax-figure" %) |
| 160 | ((( | ||
| |
18.2 | 161 | [[image:tray_en.png]] |
| |
6.2 | 162 | ))) |
| |
2.2 | 163 | |
| |
18.2 | 164 | **Icon menu** (right click): **Connect to RIG** — connect or disconnect, **Speaker** — audio to speakers, **Mixer..** — receiver selection, **Settings** — settings, **Quit** — exit. |
| |
2.2 | 165 | |
| |
18.2 | 166 | **The ✕ button and exit:** |
| |
2.2 | 167 | |
| |
18.2 | 168 | |=What you do|=What happens |
| 169 | |Click ✕, EAX is connected|The window hides to the tray, EAX keeps working | ||
| 170 | |Click ✕, EAX is connecting|Nothing — wait for the connection | ||
| 171 | |Click ✕ or Quit, EAX is not connected|EAX asks “Do you want to quit?” | ||
| 172 | |Select Quit, EAX is connected|EAX asks you to disconnect first (Connect to RIG) | ||
| |
2.2 | 173 | |
| |
6.2 | 174 | (% class="eax-note" %) |
| |
2.2 | 175 | ((( |
| |
18.2 | 176 | No icon? Click the **˄** arrow next to the clock. To keep the icon always visible, drag it to the taskbar. |
| |
1.1 | 177 | ))) |
| 178 | |||
| |
18.2 | 179 | == Summary of settings == |
| |
1.1 | 180 | |
| |
18.2 | 181 | |=Program|=Field|=ERMAK VAC|=Virtual Audio Cable |
| 182 | |EAX|URL|transceiver IP address:4002|transceiver IP address:4002 | ||
| |
6.3 | 183 | |EAX|EAX Output|Line Volume (EAX VAC)|Line 1 |
| 184 | |EAX|EAX Input|Line In (2- EAX VAC)|Line 2 | ||
| |
18.2 | 185 | |EAX|Local IP address|computer IP address on the transceiver network|computer IP address on the transceiver network |
| |
6.3 | 186 | |JTDX / WSJT-X|Input|Line In (EAX VAC)|Line 1 |
| 187 | |JTDX / WSJT-X|Output|Line Volume (2- EAX VAC)|Line 2 | ||
| 188 | |JTDX / WSJT-X|Rig|Hamlib NET rigctl, IP:4532|Hamlib NET rigctl, IP:4532 | ||
| 189 | |||
| |
18.2 | 190 | == Related articles == |
| |
6.3 | 191 | |
| |
18.2 | 192 | * [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]] |
| 193 | * [[Program windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Окна программы.WebHome]] | ||
| 194 | * [[Troubleshooting>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]] | ||
| 195 | * [[All EAX versions>>Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome]] | ||
| |
6.2 | 196 | ))) |