Last modified by UT2UK on 2026/11/16 13:12

Hide last authors
UT2UK 6.4 1 {{velocity}}
UT2UK 6.11 2 $xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle")
UT2UK 6.4 3 {{/velocity}}
UT2UK 6.2 4
5 (% class="eax" %)
UT2UK 1.1 6 (((
UT2UK 6.2 7 (% class="eax-back" %)
UT2UK 18.2 8 [[← EAX control user guide>>Main.ERMAK-TT.Руководство пользователя EAX control.WebHome]]
UT2UK 1.1 9
UT2UK 6.2 10 (% class="eax-pagehead" %)
11 (((
12 (% class="eax-pagehead-title" %)
UT2UK 18.2 13 Installing EAX on Windows
UT2UK 1.1 14
UT2UK 6.2 15 (% class="eax-pagehead-text" %)
UT2UK 18.2 16 How to install EAX and the virtual sound cards, connect to the transceiver and make your first FT8 QSO. Windows 10 and 11 (64-bit), about 15 minutes.
UT2UK 1.1 17 )))
18
UT2UK 18.2 19 === What you need ===
UT2UK 6.3 20
UT2UK 18.2 21 * The ERMAK-TT transceiver is connected to the router and the EAX interface is enabled. You know its IP address.
22 * A Windows computer on the same network and administrator rights to install the driver.
23 * For digital modes — JTDX or WSJT-X installed.
UT2UK 6.3 24
UT2UK 6.2 25 (% class="eax-toc" %)
26 (((
UT2UK 18.2 27 On this page
UT2UK 1.1 28
UT2UK 6.2 29 {{toc depth="2"/}}
30 )))
UT2UK 1.1 31
UT2UK 6.2 32 (% class="eax-howto" %)
33 (((
UT2UK 18.2 34 == Install the virtual sound cards ==
UT2UK 1.1 35
UT2UK 18.2 36 A virtual sound card is a “cable” inside the computer: EAX sends audio into it, and JTDX or WSJT-X receive it. You need **two** cards: one for receive, one for transmit. Choose a driver:
UT2UK 1.1 37
UT2UK 6.2 38 (% class="eax-split" %)
39 (((
40 (% class="eax-card" %)
41 (((
42 ERMAK VAC
UT2UK 1.1 43
UT2UK 18.2 44 Our driver, free. Low latency. Driver signature enforcement must be disabled before installation.
UT2UK 1.1 45
UT2UK 18.2 46 [[Download ERMAK VAC>>https://nx8619.your-storageshare.de/s/pdeEJr5mG4ix7PQ?dir=/EAX%20VAC||class="btn btn-default"]]
UT2UK 6.2 47 )))
UT2UK 1.1 48
UT2UK 6.2 49 (% class="eax-card" %)
50 (((
51 Virtual Audio Cable
UT2UK 4.2 52
UT2UK 18.2 53 Driver by Eugene Muzychenko. Signed, installs like a normal program. The free Lite version gives only one cable — enough for receive only.
UT2UK 1.1 54
UT2UK 18.2 55 [[Download Virtual Audio Cable>>https://vac.muzychenko.net/en/download.htm||class="btn btn-default"]]
UT2UK 1.1 56 )))
UT2UK 6.2 57 )))
UT2UK 1.1 58
UT2UK 18.2 59 {{expand title="How to install ERMAK VAC" expanded="false"}}
60 1. Disable driver signature enforcement: [[Microsoft guide>>https://answers.microsoft.com/en-us/windows/forum/all/permanent-disable-driver-signature-verification/009c3498-bef8-4564-bb52-1d05812506e0]]. If Secure Boot is enabled in BIOS, disable it.
61 1. Unpack the **EAX_VAX_X64_xxx.zip** archive.
62 1. Open **Device Manager** → **Action** → **Add legacy hardware**.
63 1. Point to the driver folder and finish the installation.
64 1. Repeat steps 3–4 once more so that there are two cards.
UT2UK 1.1 65
UT2UK 6.2 66 [[image:Main.ERMAK.Руководство пользователя ЕРМАК.EAX - утилита обмена аудиопотоками с PC.Установка и настройка EAX в среде WINDOWS.WebHome@legasy.png||width="560"]]
67 {{/expand}}
UT2UK 1.1 68
UT2UK 18.2 69 {{expand title="How to install Virtual Audio Cable" expanded="false"}}
70 1. Download the Trial or full version — Lite has only one cable.
71 1. Unpack the archive and run **setup64.exe**.
72 1. Open the **Control Panel** that comes with Virtual Audio Cable.
73 1. Set the number of cables to **2** and click **Set**.
UT2UK 4.2 74
UT2UK 18.2 75 The devices **Line 1** and **Line 2** appear in the system. Use them on this page instead of the ERMAK VAC names:
UT2UK 4.2 76
UT2UK 18.2 77 |=Where|=ERMAK VAC|=Virtual Audio Cable
UT2UK 6.2 78 |EAX → EAX Output|Line Volume (EAX VAC)|Line 1
79 |EAX → EAX Input|Line In (2- EAX VAC)|Line 2
80 |JTDX → Input|Line In (EAX VAC)|Line 1
81 |JTDX → Output|Line Volume (2- EAX VAC)|Line 2
82 {{/expand}}
UT2UK 4.2 83
UT2UK 18.2 84 **Audio format.** Open **Control Panel → Sound**. On the Playback and Recording tabs, for each virtual card open **Properties → Advanced** and select **2 channel, 16 bit, 48000 Hz**.
UT2UK 1.1 85
UT2UK 6.2 86 (% class="eax-check" %)
87 (((
UT2UK 18.2 88 Check: **Control Panel → Sound** shows two virtual cards on the Playback tab and two on the Recording tab.
UT2UK 6.2 89 )))
UT2UK 1.1 90
UT2UK 18.2 91 == Install EAX ==
UT2UK 1.1 92
UT2UK 18.2 93 [[⬇ Download EAX 1.5.2 for Windows>>attach:Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome@eaxcontrol-1.5.2-windows-x64-setup.exe||class="btn btn-primary"]]
UT2UK 1.1 94
UT2UK 18.2 95 1. Run the downloaded file.
96 1. If an old EAX version is installed, agree to remove it.
97 1. Tick **Create a desktop shortcut** if you want a shortcut, and **Run at Windows startup** if EAX should start with Windows.
98 1. Click **Install**, then **Finish**.
UT2UK 1.1 99
UT2UK 6.2 100 (% class="eax-check" %)
101 (((
UT2UK 18.2 102 Check: **EAX Control Panel** is in the Start menu.
UT2UK 6.2 103 )))
UT2UK 1.1 104
UT2UK 18.2 105 {{expand title="The EAX window is white" expanded="false"}}
106 Install the [[OpenCL, OpenGL and Vulkan Compatibility Pack>>https://apps.microsoft.com/detail/9nqpsl29bfff]] from the Microsoft Store and start EAX again.
UT2UK 6.2 107 {{/expand}}
UT2UK 1.1 108
UT2UK 18.2 109 == Set up EAX ==
UT2UK 1.1 110
UT2UK 18.2 111 Start EAX and click the settings button [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]]. Select the devices as shown:
UT2UK 1.1 112
UT2UK 6.2 113 (% class="eax-figure" %)
114 (((
UT2UK 18.2 115 [[image:devmap_windows_en.png]]
UT2UK 6.2 116 )))
UT2UK 1.1 117
UT2UK 6.2 118 * **EAX Output** — **Line Volume (EAX VAC)**
119 * **EAX Input** — **Line In (2- EAX VAC)**
UT2UK 18.2 120 * **Audio device** — your speakers or headphones, for example **Speakers (Realtek(R) Audio)**
UT2UK 1.1 121
UT2UK 6.2 122 (% class="eax-key" %)
123 (((
UT2UK 18.2 124 **Local IP address is the most important field on Windows.** A computer often has several addresses: Ethernet, Wi-Fi, VPN, VirtualBox. Select the one whose first three numbers match the transceiver address: 192.168.1.50 → 192.168.1.10. With another one EAX connects, but there is no audio. [[Why>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome||anchor="nosound"]]
UT2UK 6.2 125 )))
UT2UK 1.1 126
UT2UK 18.2 127 Click **OK**. This is how correct EAX (right) and JTDX (left) settings look:
UT2UK 1.1 128
UT2UK 6.2 129 (% class="eax-shot" %)
130 (((
131 [[image:Main.ERMAK.Руководство пользователя ЕРМАК.EAX - утилита обмена аудиопотоками с PC.Установка и настройка EAX в среде WINDOWS.WebHome@legasy4.png]]
132 )))
UT2UK 1.1 133
UT2UK 18.2 134 == Connect to the transceiver ==
UT2UK 1.1 135
UT2UK 18.2 136 1. In the URL field type the transceiver address and port 4002, for example **192.168.1.50:4002**.
137 1. Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_connect.png]].
138 1. Windows asks about network access — click **Allow access** and tick **Private networks**.
UT2UK 1.1 139
UT2UK 6.2 140 (% class="eax-check" %)
141 (((
UT2UK 18.2 142 Check: **Speed** in the status line is above zero, the L and R meters move.
UT2UK 6.2 143 )))
UT2UK 2.2 144
UT2UK 18.2 145 == Set up JTDX or WSJT-X ==
UT2UK 2.2 146
UT2UK 18.2 147 In the program select **Input — Line In (EAX VAC)** and **Output — Line Volume (2- EAX VAC)**. Details: [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]].
UT2UK 2.2 148
UT2UK 6.2 149 (% class="eax-check" %)
UT2UK 1.1 150 (((
UT2UK 18.2 151 Check: JTDX shows decodes. You are ready for QSOs.
UT2UK 2.2 152 )))
UT2UK 6.2 153 )))
UT2UK 1.1 154
UT2UK 18.2 155 == Working from the tray ==
UT2UK 1.1 156
UT2UK 18.2 157 On Windows EAX lives in the notification area, next to the clock. You can hide the window — the audio keeps flowing.
UT2UK 1.1 158
UT2UK 6.2 159 (% class="eax-figure" %)
160 (((
UT2UK 18.2 161 [[image:tray_en.png]]
UT2UK 6.2 162 )))
UT2UK 2.2 163
UT2UK 18.2 164 **Icon menu** (right click): **Connect to RIG** — connect or disconnect, **Speaker** — audio to speakers, **Mixer..** — receiver selection, **Settings** — settings, **Quit** — exit.
UT2UK 2.2 165
UT2UK 18.2 166 **The ✕ button and exit:**
UT2UK 2.2 167
UT2UK 18.2 168 |=What you do|=What happens
169 |Click ✕, EAX is connected|The window hides to the tray, EAX keeps working
170 |Click ✕, EAX is connecting|Nothing — wait for the connection
171 |Click ✕ or Quit, EAX is not connected|EAX asks “Do you want to quit?”
172 |Select Quit, EAX is connected|EAX asks you to disconnect first (Connect to RIG)
UT2UK 2.2 173
UT2UK 6.2 174 (% class="eax-note" %)
UT2UK 2.2 175 (((
UT2UK 18.2 176 No icon? Click the **˄** arrow next to the clock. To keep the icon always visible, drag it to the taskbar.
UT2UK 1.1 177 )))
178
UT2UK 18.2 179 == Summary of settings ==
UT2UK 1.1 180
UT2UK 18.2 181 |=Program|=Field|=ERMAK VAC|=Virtual Audio Cable
182 |EAX|URL|transceiver IP address:4002|transceiver IP address:4002
UT2UK 6.3 183 |EAX|EAX Output|Line Volume (EAX VAC)|Line 1
184 |EAX|EAX Input|Line In (2- EAX VAC)|Line 2
UT2UK 18.2 185 |EAX|Local IP address|computer IP address on the transceiver network|computer IP address on the transceiver network
UT2UK 6.3 186 |JTDX / WSJT-X|Input|Line In (EAX VAC)|Line 1
187 |JTDX / WSJT-X|Output|Line Volume (2- EAX VAC)|Line 2
188 |JTDX / WSJT-X|Rig|Hamlib NET rigctl, IP:4532|Hamlib NET rigctl, IP:4532
189
UT2UK 18.2 190 == Related articles ==
UT2UK 6.3 191
UT2UK 18.2 192 * [[JTDX and WSJT-X setup>>Main.ERMAK-TT.Руководство пользователя EAX control.Настройка JTDX и WSJT-X.WebHome]]
193 * [[Program windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Окна программы.WebHome]]
194 * [[Troubleshooting>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]]
195 * [[All EAX versions>>Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome]]
UT2UK 6.2 196 )))