Wiki source code of 2.1.0-tx release notes
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.1 | 1 | * **TX Power Adjustment Fixed** |
| |
2.2 | 2 | ** Resolved an issue with RF power control in the TX settings window. Power adjustment now operates correctly and consistently. |
| |
1.1 | 3 | * **PTT Footswitch Operational** |
| |
2.2 | 4 | ** The PTT footswitch is now fully functional. |
| |
1.1 | 5 | * **Remote Connection Settings Menu Added** |
| |
2.2 | 6 | ** Added a new menu section for configuring remote connection parameters. |
| 7 | |||
| 8 | [[image:1772531079223-745.png]] | ||
| 9 | |||
| |
1.1 | 10 | * **Improved Menu Navigation Mechanism** |
| |
2.2 | 11 | ** The menu navigation system has been redesigned. All settings can now be adjusted using a single MF encoder or directly via the touchscreen interface. |
| |
1.1 | 12 | * **TX Tune Power Increased** |
| |
2.2 | 13 | ** Maximum TX power in tone tuning mode has been increased from 20W to 100W. |
| |
1.1 | 14 | * **Timezone Display Fixed** |
| |
2.2 | 15 | ** Corrected the display of the currently active timezone in the Date/Time menu. |
| |
1.1 | 16 | * **Bootloader Fallback Mechanism Added** |
| |
2.2 | 17 | ** A fallback mechanism has been implemented in the bootloader. If the PTT footswitch (connected to the rear panel jack) is held down during power-on, the transceiver boots into **Recovery Mode** and automatically connects to a remote service server. In this mode, the manufacturer can perform full diagnostics and execute a complete firmware update from scratch, similar to factory servicing. |