Wiki source code of 2.5.6-hilbert release notes
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | **Features**: | ||
| 2 | |||
| 3 | * The rear USB port can now be switched between **Host (Master)** and **Slave** modes via the menu. | ||
| 4 | |||
| 5 | [[image:1777545492264-514.png||height="450" width="800"]] | ||
| 6 | |||
| 7 | * In **USB Slave** mode, added composite USB gadget support with a virtual COM port (**CAT control**) and a virtual audio device for PC connection. | ||
| 8 | |||
| 9 | [[image:1777545521540-352.png]] | ||
| 10 | |||
| 11 | |||
| 12 | [[image:1777545531725-172.png]] [[image:1777545537835-544.png]] | ||
| 13 | |||
| 14 | |||
| 15 | * Reworked the internal DSP filters: latency reduced by **20 ms**, and the RX/TX passband lower limit was extended down to **50 Hz**. | ||
| 16 | |||
| 17 | [[image:1777545598327-286.png||height="469" width="800"]] | ||
| 18 | |||
| 19 | |||
| 20 | * Improved unwanted sideband suppression to **-90 dB** across the entire audio range. | ||
| 21 | * RIT/XIT are now automatically disabled in **Split** mode. | ||
| 22 | * Redesigned the boot and startup splash screens. | ||
| 23 | * Improved the automatic update mechanism for the kernel and other system components. | ||
| 24 | * Added **Recovery Mode**: to recover a bricked device, power on the transceiver while holding the **PTT pedal**. The transceiver will boot from the recovery partition and connect to the remote server for troubleshooting. | ||
| 25 | * Total measured end-to-end latency from the antenna input to the PC audio output in USB mode is **128 ms** (**EAX mode: 150 ms**). Those valuse wil be improved in tne next relases. | ||
| 26 | |||
| 27 | [[image:1777545644733-692.png]] [[image:1777545756154-399.png]] | ||
| 28 | |||
| 29 | |||
| 30 |