Wiki source code of 2.5.6-hilbert release notes

Version 17.3 by UT2UK on 2026/11/16 16:42

Show last authors
1 {{velocity}}$xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle"){{/velocity}}
2
3 (% class="eax" %)
4 (((
5 **Features**:
6
7 * The rear USB port can now be switched between **Host (Master)** and **Slave** modes via the menu.
8
9 [[image:1777545492264-514.png||height="450" width="800"]]
10
11 * In **USB Slave** mode, added composite USB gadget support with a virtual COM port (**CAT control**) and a virtual audio device for PC connection.
12
13 [[image:1777545521540-352.png]]
14
15 [[image:1777546193823-102.png]]
16
17 [[image:1777545531725-172.png]] [[image:1777545537835-544.png]]
18
19
20 * Reworked the internal DSP filters: latency reduced by **20 ms**, and the RX/TX passband lower limit was extended down to **50 Hz**.
21
22 [[image:1777545598327-286.png||height="469" width="800"]]
23
24 [[image:1777545885743-121.png||height="450" width="800"]]
25
26
27 * Improved unwanted sideband suppression to **-90 dB** across the entire audio range.
28 * RIT/XIT are now automatically disabled in **Split** mode.
29 * Redesigned the boot and startup splash screens.
30 * Improved the automatic update mechanism for the kernel and other system components.
31 * Optimised DSP code to reduce memory and core utiliztions.
32 * Added **Recovery Mode**: to recover a bricked device, power on the transceiver while holding the **PTT pedal**. The transceiver will boot from the recovery partition and connect to the remote server for troubleshooting.
33 * Total measured end-to-end latency from the antenna input to the PC audio output in USB mode is **128 ms** (**EAX mode: 150 ms**). Those values wiil be improved  in the next releases.
34
35 [[image:1777545644733-692.png]] [[image:1777545756154-399.png]]
36 )))
37
38
39