Wiki source code of 2.5.6-hilbert release notes
Last modified by UT2UK on 2026/11/16 16:52
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | {{velocity}}$xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle"){{/velocity}} | ||
| 2 | |||
| 3 | (% class="eax" %) | ||
| 4 | ((( | ||
| 5 | (% class="eax-back" %) | ||
| 6 | [[← ERMAK-TT test firmware updates>>Main.ERMAK-TT.ERMAK-TT test firmware updates .WebHome]] | ||
| 7 | |||
| 8 | (% class="eax-pagehead" %) | ||
| 9 | ((( | ||
| 10 | (% class="eax-pagehead-title" %) | ||
| 11 | 2.5.6-hilbert release notes | ||
| 12 | |||
| 13 | (% class="eax-pagehead-text" %) | ||
| 14 | Changes in version 2.5.6-hilbert: rear USB Host/Slave mode, virtual COM port and audio device, reworked DSP filters, recovery mode. | ||
| 15 | ))) | ||
| 16 | |||
| 17 | **Features**: | ||
| 18 | |||
| 19 | * The rear USB port can now be switched between **Host (Master)** and **Slave** modes via the menu. | ||
| 20 | |||
| 21 | [[image:1777545492264-514.png||height="450" width="800"]] | ||
| 22 | |||
| 23 | * In **USB Slave** mode, added composite USB gadget support with a virtual COM port (**CAT control**) and a virtual audio device for PC connection. | ||
| 24 | |||
| 25 | [[image:1777545521540-352.png]] | ||
| 26 | |||
| 27 | [[image:1777546193823-102.png]] | ||
| 28 | |||
| 29 | [[image:1777545531725-172.png]] [[image:1777545537835-544.png]] | ||
| 30 | |||
| 31 | |||
| 32 | * Reworked the internal DSP filters: latency reduced by **20 ms**, and the RX/TX passband lower limit was extended down to **50 Hz**. | ||
| 33 | |||
| 34 | [[image:1777545598327-286.png||height="469" width="800"]] | ||
| 35 | |||
| 36 | [[image:1777545885743-121.png||height="450" width="800"]] | ||
| 37 | |||
| 38 | |||
| 39 | * Improved unwanted sideband suppression to **-90 dB** across the entire audio range. | ||
| 40 | * RIT/XIT are now automatically disabled in **Split** mode. | ||
| 41 | * Redesigned the boot and startup splash screens. | ||
| 42 | * Improved the automatic update mechanism for the kernel and other system components. | ||
| 43 | * Optimised DSP code to reduce memory and core utiliztions. | ||
| 44 | * Added **Recovery Mode**: to recover a bricked device, power on the transceiver while holding the **PTT pedal**. The transceiver will boot from the recovery partition and connect to the remote server for troubleshooting. | ||
| 45 | * Total measured end-to-end latency from the antenna input to the PC audio output in USB mode is **128 ms** (**EAX mode: 150 ms**). Those values wiil be improved in the next releases. | ||
| 46 | |||
| 47 | [[image:1777545644733-692.png]] [[image:1777545756154-399.png]] | ||
| 48 | ))) | ||
| 49 | |||
| 50 | |||
| 51 |