TX settings window

To enter the transmit path operational settings mode, press the encoder RF

To exit the window, press the encoder RF again or press the buttons OK / X

At the bottom of the on-screen menu, you can select one of five input signal sources:

Each input has its own mnemonic button

The button  controls enabling/disabling audio monitoring in transmit mode.

Switching to transmit mode and exiting it is performed by a short press of the PTT button

After entering PTT transmit mode, the button changes its color to red

• Operational output power adjustment in transmit mode is performed using the RF encoder
• Operational monitoring volume adjustment in transmit mode is performed using the AF encoder

In this mode, a dynamic power level control appears at the bottom of the display:

or a monitoring level control:

Switching to tone tuning mode is performed by a LONG press of the PTT button

The tone carrier frequency in this mode is 1 kHz