Wiki source code of Окна программы
Last modified by UT2UK on 2026/11/16 13:22
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | {{velocity}} | ||
| 2 | $xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle") | ||
| 3 | {{/velocity}} | ||
| 4 | |||
| 5 | (% class="eax" %) | ||
| 6 | ((( | ||
| 7 | (% class="eax-back" %) | ||
| 8 | [[← EAX control user guide>>Main.ERMAK-TT.Руководство пользователя EAX control.WebHome]] | ||
| 9 | |||
| 10 | (% class="eax-pagehead" %) | ||
| 11 | ((( | ||
| 12 | (% class="eax-pagehead-title" %) | ||
| 13 | Program windows | ||
| 14 | |||
| 15 | (% class="eax-pagehead-text" %) | ||
| 16 | What every EAX button, meter and setting means. | ||
| 17 | ))) | ||
| 18 | |||
| 19 | (% class="eax-toc" %) | ||
| 20 | ((( | ||
| 21 | On this page | ||
| 22 | |||
| 23 | {{toc depth="2"/}} | ||
| 24 | ))) | ||
| 25 | |||
| 26 | == Main window == | ||
| 27 | |||
| 28 | (% class="eax-shot" %) | ||
| 29 | ((( | ||
| 30 | [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@01_main.png]] | ||
| 31 | ))) | ||
| 32 | |||
| 33 | **URL field** — the transceiver address and port 4002, for example **192.168.1.50:4002**. EAX remembers the addresses it connected to. To remove an address: right-click the field → **Delete RIG's URL..** | ||
| 34 | |||
| 35 | **Buttons on the right:** | ||
| 36 | |||
| 37 | * [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_connect.png]] — connect to the transceiver or disconnect. Red means not connected. | ||
| 38 | * [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_speaker.png]] — turn audio on the computer speakers on or off. The arrow next to it selects the receiver. | ||
| 39 | * [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]] — settings. Available only when EAX is not connected. | ||
| 40 | |||
| 41 | **Meters:** | ||
| 42 | |||
| 43 | * **L** — RX1 receiver level; | ||
| 44 | * **R** — RX2 receiver level; | ||
| 45 | * **M** — transmit level: the audio EAX sends to the transceiver. | ||
| 46 | |||
| 47 | === Status line === | ||
| 48 | |||
| 49 | The status line shows whether audio is flowing. This is how it looks with a working connection: | ||
| 50 | |||
| 51 | (% class="eax-shot" %) | ||
| 52 | ((( | ||
| 53 | [[image:Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome@1775141576406-233.png]] | ||
| 54 | ))) | ||
| 55 | |||
| 56 | (% class="eax-caption" %) | ||
| 57 | Connected: Speed 730/376 kbit/s, the L and R meters show the receive level. | ||
| 58 | |||
| 59 | * **Speed, first number** — receive rate: how much audio arrives from the transceiver, in kilobits per second. | ||
| 60 | * **Speed, second number** — transmit rate: how much audio EAX sends to the transceiver. | ||
| 61 | * **Latency** — the computer audio buffer delay, in seconds. It grows when you increase the buffers in settings. | ||
| 62 | |||
| 63 | The values are updated every 2 seconds. | ||
| 64 | |||
| 65 | |=What you see|=What it means | ||
| 66 | |Both numbers above zero|Everything works: audio flows both ways | ||
| 67 | |First number is 0|Audio from the transceiver does not arrive. Most often — wrong Local IP address or a firewall. [[How to fix>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome||anchor="nosound"]] | ||
| 68 | |First number below 200 and jumping|The network cannot keep up, the audio will drop out. Check Wi-Fi | ||
| 69 | |Reconnecting in N s...|The connection dropped, EAX reconnects by itself in N seconds | ||
| 70 | |||
| 71 | (% class="eax-note" %) | ||
| 72 | ((( | ||
| 73 | If receive stays below 200 kbit/s for about 10 seconds, EAX treats the connection as lost, disconnects and shows **Lost connection with Rig**. | ||
| 74 | ))) | ||
| 75 | |||
| 76 | == Listen to the bands on the computer == | ||
| 77 | |||
| 78 | 1. Connect to the transceiver. | ||
| 79 | 1. Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_speaker.png]]. | ||
| 80 | 1. To select a receiver, click the arrow to the right of this button. | ||
| 81 | |||
| 82 | (% class="eax-shot" %) | ||
| 83 | ((( | ||
| 84 | [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@02_menu.png]] | ||
| 85 | ))) | ||
| 86 | |||
| 87 | * **RX1+RX2** — both receivers: RX1 in the left ear, RX2 in the right. | ||
| 88 | * **RX1** — first receiver only, in both ears. | ||
| 89 | * **RX2** — second receiver only, in both ears. | ||
| 90 | |||
| 91 | The choice affects only the speakers. Digital mode programs always get both receivers. | ||
| 92 | |||
| 93 | == Settings window == | ||
| 94 | |||
| 95 | Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]], change the parameters and click **OK**. | ||
| 96 | |||
| 97 | (% class="eax-shot" %) | ||
| 98 | ((( | ||
| 99 | [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@03_settings.png]] | ||
| 100 | ))) | ||
| 101 | |||
| 102 | === Audio devices === | ||
| 103 | |||
| 104 | **EAX Output** — the virtual card for receive. EAX sends the transceiver audio here. | ||
| 105 | |||
| 106 | **EAX Input** — the virtual card for transmit. EAX takes audio from here and sends it to the transceiver. | ||
| 107 | |||
| 108 | **Audio device** — your speakers or headphones. | ||
| 109 | |||
| 110 | Which devices to select is shown on the diagrams in the guides for [[Linux>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Linux.WebHome]] and [[Windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Windows.WebHome]]. | ||
| 111 | |||
| 112 | (% class="eax-note" %) | ||
| 113 | ((( | ||
| 114 | EAX reads the device list at startup. If a device is missing, close EAX and start it again. | ||
| 115 | ))) | ||
| 116 | |||
| 117 | === RX and TX buffers === | ||
| 118 | |||
| 119 | The audio reserve size. **Auto** gives the lowest latency. If the audio drops out — usually on Wi-Fi — select **x4** or **x8**. | ||
| 120 | |||
| 121 | === Network === | ||
| 122 | |||
| 123 | **Local IP address** — the IP address of your computer on the same network as the transceiver. The transceiver sends audio to exactly this address. | ||
| 124 | |||
| 125 | (% class="eax-key" %) | ||
| 126 | ((( | ||
| 127 | **This is the most important setting.** The first three numbers of the computer and transceiver addresses must match: transceiver 192.168.1.50 → computer 192.168.1.10. On first start it shows 127.0.0.1 — audio does not work with it. Details: [[why the IP address matters>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]]. | ||
| 128 | ))) | ||
| 129 | |||
| 130 | **Local UDP port** — the port the audio arrives on. Leave **16742**. | ||
| 131 | |||
| 132 | === Appearance === | ||
| 133 | |||
| 134 | **Theme** — the window colour: System Default, Dark Teal, Dark Amber, Dark Cyan or Light Blue. | ||
| 135 | |||
| 136 | (% class="eax-shot" %) | ||
| 137 | ((( | ||
| 138 | [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@04_main_dark_teal.png]] | ||
| 139 | ))) | ||
| 140 | |||
| 141 | (% class="eax-caption" %) | ||
| 142 | Dark Teal theme. | ||
| 143 | |||
| 144 | == If the connection drops == | ||
| 145 | |||
| 146 | EAX reconnects by itself: first after a second, then less often, up to once every 30 seconds. The status line shows **Reconnecting in N s...** | ||
| 147 | |||
| 148 | On Windows EAX also works from the tray — see “Working from the tray” in the [[Windows guide>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Windows.WebHome]]. | ||
| 149 | |||
| 150 | == Advanced == | ||
| 151 | |||
| 152 | {{expand title="Where settings are stored" expanded="false"}} | ||
| 153 | * Linux: file **~~/.config/Ermak/eAX.conf** | ||
| 154 | * Windows: registry, **HKEY_CURRENT_USER\Software\Ermak\eAX** | ||
| 155 | {{/expand}} | ||
| 156 | |||
| 157 | {{expand title="Command-line options and log" expanded="false"}} | ||
| 158 | {{code language="none"}} | ||
| 159 | eax [options] | ||
| 160 | -t, --theme <theme> default | dark_teal | dark_amber | dark_cyan | light_blue | ||
| 161 | -l, --log-file <file> write the log to a file | ||
| 162 | -L, --log-level <level> error (default) ... debug | ||
| 163 | -v, --version show the version | ||
| 164 | {{/code}} | ||
| 165 | |||
| 166 | To report a bug, start EAX with a log and attach the file: | ||
| 167 | |||
| 168 | {{code language="bash"}} | ||
| 169 | eax -L debug -l ~/eax.log | ||
| 170 | {{/code}} | ||
| 171 | {{/expand}} | ||
| 172 | |||
| 173 | == Related articles == | ||
| 174 | |||
| 175 | * [[Installation and setup on Linux>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Linux.WebHome]] | ||
| 176 | * [[Installation and setup on Windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Windows.WebHome]] | ||
| 177 | * [[Troubleshooting>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]] | ||
| 178 | ))) |