Wiki source code of Окна программы

Last modified by UT2UK on 2026/11/16 13:22

Show last authors
1 {{velocity}}
2 $xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle")
3 {{/velocity}}
4
5 (% class="eax" %)
6 (((
7 (% class="eax-back" %)
8 [[← EAX control user guide>>Main.ERMAK-TT.Руководство пользователя EAX control.WebHome]]
9
10 (% class="eax-pagehead" %)
11 (((
12 (% class="eax-pagehead-title" %)
13 Program windows
14
15 (% class="eax-pagehead-text" %)
16 What every EAX button, meter and setting means.
17 )))
18
19 (% class="eax-toc" %)
20 (((
21 On this page
22
23 {{toc depth="2"/}}
24 )))
25
26 == Main window ==
27
28 (% class="eax-shot" %)
29 (((
30 [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@01_main.png]]
31 )))
32
33 **URL field** — the transceiver address and port 4002, for example **192.168.1.50:4002**. EAX remembers the addresses it connected to. To remove an address: right-click the field → **Delete RIG's URL..**
34
35 **Buttons on the right:**
36
37 * [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_connect.png]] — connect to the transceiver or disconnect. Red means not connected.
38 * [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_speaker.png]] — turn audio on the computer speakers on or off. The arrow next to it selects the receiver.
39 * [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]] — settings. Available only when EAX is not connected.
40
41 **Meters:**
42
43 * **L** — RX1 receiver level;
44 * **R** — RX2 receiver level;
45 * **M** — transmit level: the audio EAX sends to the transceiver.
46
47 === Status line ===
48
49 The status line shows whether audio is flowing. This is how it looks with a working connection:
50
51 (% class="eax-shot" %)
52 (((
53 [[image:Main.ERMAK-TT.Руководство пользователя EAX control.История версий.WebHome@1775141576406-233.png]]
54 )))
55
56 (% class="eax-caption" %)
57 Connected: Speed 730/376 kbit/s, the L and R meters show the receive level.
58
59 * **Speed, first number** — receive rate: how much audio arrives from the transceiver, in kilobits per second.
60 * **Speed, second number** — transmit rate: how much audio EAX sends to the transceiver.
61 * **Latency** — the computer audio buffer delay, in seconds. It grows when you increase the buffers in settings.
62
63 The values are updated every 2 seconds.
64
65 |=What you see|=What it means
66 |Both numbers above zero|Everything works: audio flows both ways
67 |First number is 0|Audio from the transceiver does not arrive. Most often — wrong Local IP address or a firewall. [[How to fix>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome||anchor="nosound"]]
68 |First number below 200 and jumping|The network cannot keep up, the audio will drop out. Check Wi-Fi
69 |Reconnecting in N s...|The connection dropped, EAX reconnects by itself in N seconds
70
71 (% class="eax-note" %)
72 (((
73 If receive stays below 200 kbit/s for about 10 seconds, EAX treats the connection as lost, disconnects and shows **Lost connection with Rig**.
74 )))
75
76 == Listen to the bands on the computer ==
77
78 1. Connect to the transceiver.
79 1. Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_speaker.png]].
80 1. To select a receiver, click the arrow to the right of this button.
81
82 (% class="eax-shot" %)
83 (((
84 [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@02_menu.png]]
85 )))
86
87 * **RX1+RX2** — both receivers: RX1 in the left ear, RX2 in the right.
88 * **RX1** — first receiver only, in both ears.
89 * **RX2** — second receiver only, in both ears.
90
91 The choice affects only the speakers. Digital mode programs always get both receivers.
92
93 == Settings window ==
94
95 Click [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@ic_settings.png]], change the parameters and click **OK**.
96
97 (% class="eax-shot" %)
98 (((
99 [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@03_settings.png]]
100 )))
101
102 === Audio devices ===
103
104 **EAX Output** — the virtual card for receive. EAX sends the transceiver audio here.
105
106 **EAX Input** — the virtual card for transmit. EAX takes audio from here and sends it to the transceiver.
107
108 **Audio device** — your speakers or headphones.
109
110 Which devices to select is shown on the diagrams in the guides for [[Linux>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Linux.WebHome]] and [[Windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Windows.WebHome]].
111
112 (% class="eax-note" %)
113 (((
114 EAX reads the device list at startup. If a device is missing, close EAX and start it again.
115 )))
116
117 === RX and TX buffers ===
118
119 The audio reserve size. **Auto** gives the lowest latency. If the audio drops out — usually on Wi-Fi — select **x4** or **x8**.
120
121 === Network ===
122
123 **Local IP address** — the IP address of your computer on the same network as the transceiver. The transceiver sends audio to exactly this address.
124
125 (% class="eax-key" %)
126 (((
127 **This is the most important setting.** The first three numbers of the computer and transceiver addresses must match: transceiver 192.168.1.50 → computer 192.168.1.10. On first start it shows 127.0.0.1 — audio does not work with it. Details: [[why the IP address matters>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]].
128 )))
129
130 **Local UDP port** — the port the audio arrives on. Leave **16742**.
131
132 === Appearance ===
133
134 **Theme** — the window colour: System Default, Dark Teal, Dark Amber, Dark Cyan or Light Blue.
135
136 (% class="eax-shot" %)
137 (((
138 [[image:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome@04_main_dark_teal.png]]
139 )))
140
141 (% class="eax-caption" %)
142 Dark Teal theme.
143
144 == If the connection drops ==
145
146 EAX reconnects by itself: first after a second, then less often, up to once every 30 seconds. The status line shows **Reconnecting in N s...**
147
148 On Windows EAX also works from the tray — see “Working from the tray” in the [[Windows guide>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Windows.WebHome]].
149
150 == Advanced ==
151
152 {{expand title="Where settings are stored" expanded="false"}}
153 * Linux: file **~~/.config/Ermak/eAX.conf**
154 * Windows: registry, **HKEY_CURRENT_USER\Software\Ermak\eAX**
155 {{/expand}}
156
157 {{expand title="Command-line options and log" expanded="false"}}
158 {{code language="none"}}
159 eax [options]
160 -t, --theme <theme> default | dark_teal | dark_amber | dark_cyan | light_blue
161 -l, --log-file <file> write the log to a file
162 -L, --log-level <level> error (default) ... debug
163 -v, --version show the version
164 {{/code}}
165
166 To report a bug, start EAX with a log and attach the file:
167
168 {{code language="bash"}}
169 eax -L debug -l ~/eax.log
170 {{/code}}
171 {{/expand}}
172
173 == Related articles ==
174
175 * [[Installation and setup on Linux>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Linux.WebHome]]
176 * [[Installation and setup on Windows>>Main.ERMAK-TT.Руководство пользователя EAX control.Установка и настройка в Windows.WebHome]]
177 * [[Troubleshooting>>Main.ERMAK-TT.Руководство пользователя EAX control.Решение проблем.WebHome]]
178 )))