EAX control user guide

Last modified by UT2UK on 2026/11/16 12:58

Failed to execute the [velocity] macro. Cause: [The execution of the [velocity] script macro is not allowed in [xwiki:Main.ERMAK-TT.Руководство пользователя EAX control.WebHome]. Check the rights of its last author or the parameters if it's rendered from another script.]. Click on this message for details.

ERMAK-TT RX and TX audio on your computer

EAX carries audio over your home network, no wires. Work FT8 QSOs and listen to the bands right from your shack — no audio cables and no USB sound card.

hero.png

What do you want to do?

Work FT8, FT4 and other digital modes

JTDX, WSJT-X, fldigi: decodes on screen, transmit from the program.

Listen to the bands on your computer

RX1 and RX2 in headphones or shack speakers.

Operate from a remote QTH

The rig stays at your home QTH, you are at the cottage or on holiday. Port forwarding or VPN.

Install EAX on Linux

Fedora and Ubuntu. About 15 minutes.

Install EAX on Windows

Windows 10 and 11. About 15 minutes.

No connection or no audio

Find your case — fixed in a couple of minutes.

How the audio flows

eax_overview.png

The transceiver sends RX audio to EAX. EAX passes it to a virtual sound card — a “cable” inside the computer. The digital mode program takes the audio from that card. On transmit, the audio goes back through the second virtual card.

Download

Latest version — 1.5.2.

Ubuntu 20.04 and 22.04, Fedora 38–44 and the change log — on the all EAX versions page.

Quick start

You need: an ERMAK-TT transceiver and a computer on the same router, and 15 minutes.

Prepare the transceiver

Connect the transceiver to the router by cable or Wi-Fi. Enable the EAX interface in the remote connection settings. For transmit, select the EAX source in the TX settings window.

Install EAX and a virtual sound card

Follow the guide for Linux or Windows.

Connect to the transceiver

Type the transceiver address and port 4002 in the URL field, for example 192.168.1.50:4002. Click the connect button ic_connect.png.

Check: in the EAX status line Speed is above zero, the L and R meters move.

Set up your digital mode program

Select the virtual sound cards and the CAT server in JTDX or WSJT-X: JTDX and WSJT-X setup.

Check: JTDX shows decodes, the Tune button keys the transmitter. You are ready for your first QSO.

Connected, but no audio? Most often the wrong computer IP address is selected in EAX settings. Check it below or open Connected, but no audio.

Check the IP address for EAX

FAQ

Do I need the Internet?

No. EAX works on your home network, through your router. You need the Internet only to operate from a remote QTH. There are two ways then: port forwarding on the routers (if you have a public IP) or VPN. Details: Operating from a remote QTH.

Can I use Wi-Fi?

Yes. A cable is more reliable, but Wi-Fi works too. If the audio drops out, increase RX buffer in EAX settings to x4 or x8.

What is the audio latency?

About 150–200 ms from the antenna to the computer. That is less than through the transceiver USB audio. Measurements and a comparison with Flex Radio — in Latency measurement.

Can I listen to both receivers?

Yes. EAX sends RX1 in the left channel and RX2 in the right one. In headphones you can hear both at once or select one — see Program windows.

Why EAX if the transceiver has USB audio?

EAX works over the network: the computer can be in another room, no cable from the rig to the computer. And the latency is even lower than with USB.

How much does EAX cost?

EAX is free. On Windows you need a virtual sound card driver: our ERMAK VAC (free) or Virtual Audio Cable (free and paid versions).