2.5.6-hilbert release notes

Version 17.3 by UT2UK on 2026/11/16 16:42
Warning
For security reasons, the document is displayed in restricted mode as it is not the current version. There may be differences and errors due to this.

Failed to execute the [velocity] macro. Cause: [The execution of the [velocity] script macro is not allowed in [xwiki:Main.ERMAK-TT.ERMAK-TT test firmware updates .2\.5\.2-hilbert release notes.WebHome]. Check the rights of its last author or the parameters if it's rendered from another script.]. Click on this message for details.

Features:

  • The rear USB port can now be switched between Host (Master) and Slave modes via the menu.

1777545492264-514.png

  • In USB Slave mode, added composite USB gadget support with a virtual COM port (CAT control) and a virtual audio device for PC connection.

1777545521540-352.png

1777546193823-102.png

1777545531725-172.png  1777545537835-544.png

  • Reworked the internal DSP filters: latency reduced by 20 ms, and the RX/TX passband lower limit was extended down to 50 Hz.

1777545598327-286.png

1777545885743-121.png

  • Improved unwanted sideband suppression to -90 dB across the entire audio range.
  • RIT/XIT are now automatically disabled in Split mode.
  • Redesigned the boot and startup splash screens.
  • Improved the automatic update mechanism for the kernel and other system components.
  • Optimised DSP code to reduce memory and core utiliztions.
  • Added Recovery Mode: to recover a bricked device, power on the transceiver while holding the PTT pedal. The transceiver will boot from the recovery partition and connect to the remote server for troubleshooting.
  • Total measured end-to-end latency from the antenna input to the PC audio output in USB mode is 128 ms (EAX mode: 150 ms). Those values wiil be improved  in the next releases.

1777545644733-692.png  1777545756154-399.png