Wiki source code of 2.5.6-hilbert release notes
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
| |
17.3 | 1 | {{velocity}}$xwiki.ssx.use("Main.DocStyle")$xwiki.jsx.use("Main.DocStyle"){{/velocity}} |
| 2 | |||
| 3 | (% class="eax" %) | ||
| 4 | ((( | ||
| |
1.2 | 5 | **Features**: |
| 6 | |||
| 7 | * The rear USB port can now be switched between **Host (Master)** and **Slave** modes via the menu. | ||
| 8 | |||
| 9 | [[image:1777545492264-514.png||height="450" width="800"]] | ||
| 10 | |||
| 11 | * In **USB Slave** mode, added composite USB gadget support with a virtual COM port (**CAT control**) and a virtual audio device for PC connection. | ||
| 12 | |||
| |
4.2 | 13 | [[image:1777545521540-352.png]] |
| |
1.2 | 14 | |
| |
14.1 | 15 | [[image:1777546193823-102.png]] |
| |
1.2 | 16 | |
| |
4.2 | 17 | [[image:1777545531725-172.png]] [[image:1777545537835-544.png]] |
| 18 | |||
| |
8.1 | 19 | |
| |
1.2 | 20 | * Reworked the internal DSP filters: latency reduced by **20 ms**, and the RX/TX passband lower limit was extended down to **50 Hz**. |
| |
4.2 | 21 | |
| |
6.2 | 22 | [[image:1777545598327-286.png||height="469" width="800"]] |
| |
4.2 | 23 | |
| |
11.1 | 24 | [[image:1777545885743-121.png||height="450" width="800"]] |
| |
8.1 | 25 | |
| |
11.1 | 26 | |
| |
1.2 | 27 | * Improved unwanted sideband suppression to **-90 dB** across the entire audio range. |
| 28 | * RIT/XIT are now automatically disabled in **Split** mode. | ||
| 29 | * Redesigned the boot and startup splash screens. | ||
| 30 | * Improved the automatic update mechanism for the kernel and other system components. | ||
| |
12.1 | 31 | * Optimised DSP code to reduce memory and core utiliztions. |
| |
1.2 | 32 | * Added **Recovery Mode**: to recover a bricked device, power on the transceiver while holding the **PTT pedal**. The transceiver will boot from the recovery partition and connect to the remote server for troubleshooting. |
| |
17.1 | 33 | * Total measured end-to-end latency from the antenna input to the PC audio output in USB mode is **128 ms** (**EAX mode: 150 ms**). Those values wiil be improved in the next releases. |
| |
6.2 | 34 | |
| |
8.1 | 35 | [[image:1777545644733-692.png]] [[image:1777545756154-399.png]] |
| |
17.3 | 36 | ))) |
| |
8.1 | 37 | |
| 38 | |||
| 39 |