Wiki source code of Working with RIT/XIT
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
27.2 | 1 | To switch to **RIT** (receiver tuning) or //XIT// (transmitter tuning) mode while in operating mode, press and hold the F7 (STEP) button for 1 second. After the drop-down menu appears, select the desired mode, **RIT** or **XIT**: A gray indicator means that the detuning is turned off. |
| |
1.1 | 2 | |
| |
27.2 | 3 | |
| |
25.1 | 4 | [[image:main.png]] |
| 5 | |||
| |
27.2 | 6 | After the drop-down menu appears, select the desired mode, **RIT** or **XIT**: |
| |
25.1 | 7 | |
| |
21.1 | 8 | [[image:main01.png]] |
| |
1.1 | 9 | |
| |
27.3 | 10 | A gray indicator means that the detuning is turned off. |
| |
1.1 | 11 | |
| |
27.3 | 12 | When the detuning mode is active, the **LOCK** button works. You can set the desired detuning value and press the **LOCK** button to prevent it from changing when you turn the tuning knob. |
| |
1.1 | 13 | |
| |
27.3 | 14 | === RIT - receiver detuning === |
| |
1.1 | 15 | |
| |
27.3 | 16 | In this mode, the green **RIT** indicator (1) lights up and the detuning value (2) is displayed in green. When you turn the main tuning knob, an additional vertical line appears on the spectrum display, showing the current reception frequency. (3) The name of the STEP button changes to **RIT** Pressing and holding the F7 (**RIT**) button resets the detuning value, while pressing it briefly turns off RIT mode. The maximum detuning value is +-30 kHz. |
| |
1.1 | 17 | |
| |
27.3 | 18 | |
| |
21.1 | 19 | [[image:rit10.png]] |
| |
20.1 | 20 | |
| |
27.3 | 21 | === === |
| |
1.1 | 22 | |
| |
9.1 | 23 | В этом режим загорается оранжевый индикатор **XIT** (1) и значение расстройки (2) индицируется оранжевым цветом. При вращении основной ручки настройки на экране спектроскопа появляется дополнительная вертикальная линия, показывающая текущую частоту передатчика (3) Название кнопки **STEP** меняется на **XIT Повторное длинное нажатие -кнопки F7 (XIT)** - обнуляет значение расстройки, короткое - выключает режим XIT. Максимальное значение расстройки +-30КГц |
| |
21.1 | 24 | [[image:rit20.png]] |